A-96.250.511 / 091120
AMI Turbiwell
Program List and Explanations
87
2.2.3.1.1
Number:
Calibration counter.
Date, Time:
Date and time of the calibration.
Factor cal.
: Factor of the last calibration.
Factor active
: Current factor in use for the measurement.
2.2.3.2
Ver. history:
Only for diagnostic purposes. Review the values of the
last verifications. Max. 64 data records are memorized.
2.2.3.2.1
Number:
Verification counter.
Date, Time:
Date and time of the verification.
Verikit #:
Name of the verikit.
Meas value:
The measured value of the verification.
Deviation:
Shows the deviation in % from the reference value. The
reference value is measured and stored during the “Matching”.
2.2.3.3
VERI-KIT History:
2.2.3.3.1
Number:
Matching counter.
Date, Time:
Date and time of the matching.
Verikit #:
Name of the verikit.
Assign. Value:
The value on the label of the Verikit which was en
-
tered during Matching.
Meas. Value:
The measured value is stored as reference value for
the verification.
2.2.3
Process Cal. ppm
2.2.3.1
Zero
: 1
st
calibration point. Background of sample without component
in FNU/NTU.
Slope
: Factor in FNU, NTU or ppm.
2.3 Sample
2.3.1
Sample ID:
Shows the identification assigned to a sample. This iden
-
tification is defined by the user to identify the location of the sample.
Sample flow:
Flow in l/h (if Q-Flow or Q-Hflow is selected).
If deltaT flow is selected, additionally:
deltaT 1
: Temperature measured at sample inlet of deltaT sensor
deltaT 2
: Temperature measured at sample outlet of deltaT sensor
Available if ppm is chosen, see menu
