11. CAMERA/VIDEO/FUSION-Link
11-5
FLIR camera
Images from an infrared camera allow you to navigate easily at night or in bad weath-
er. Open the home screen, then tap [Settings]
[Camera]
[FLIR Installation].
Note:
To use the PTZ function of the FLIR camera with the Multi-Function Display, a
setting (Nexus CGI Interface, port: 8090) is required at the FLIR camera. See the op-
erator’s manual of the FLIR camera for details.
Scan IP
: Tap [Scan IP] to scan the IP address automatically when connecting an FLIR
camera.
FLIR IP
: Enter the IP address manually with the software keyboard then tap [
].
Video Source
: Select the input source for the FLIR.
Camera Offset (Right-left)
: Adjust the side position of the FLIR camera.
Camera Offset (Up-Down)
: Adjust the up-and down position of the FLIR camera.
Automatic Zoom
: Turn on to turn on the automatic zoom.
Zoom Distance
: Set the distance to zoom automatically.
Camera Altitude
: Set the altitude for the FLIR camera.
Summary of Contents for SMD12
