Suzuki SMD12, Operator'S Manual

Page: 324 / 338

APPENDIX 1 MENU TREE
AP-9
Alarm
Hardware Alarm ( ON , OFF )
XTE Alarm (ON, OFF )
Depth Alarm (ON, OFF )
Depth Alarm Value (0 - 900(ft), 30 )
Sea Surface Temperature Alarm ( Off , Over, Under, Within, Out of)
Temperature Alarm Value (32 - 140(
°
F
), 70.00 )
Temp. Alarm Range Min Value (15 - 160(
°
F
), 60.0 )
Temp. Alarm Range Max Value (15 - 160(
°
F
), 70.0 )
Temp. Shear Alarm Value (0 - 15(
°
F
), 1.0 )
Speed Alarm ( Off , Over, Under)
Speed Alarm Value (0 - 99.9(kn), 10.0 )
Anchor Watch Alarm (ON, OFF )
Anchor Watch Alarm Value (1 - 3300(ft), 150 )
Low Fuel Alarm (ON, OFF )
Low Fuel Alarm Level (10-50%; 20% )
Notification Sound ( ON , OFF)
Alarm Sound when NAVpilot is engaged ( ON , OFF )
Alarm Sound ( ON , OFF)
Sound Alarm Until Acknowledged ( ON , OFF)
Save Log File (Save log file to micro SD card.)
Reset Default Settings
Fish Finder Alarms
Initial Setup
Fish Alarm ( OFF , ON) Range Minimum Value ( 0~1200; 0m )
Range Maximum Value ( 0~1200; 3m )
Fish Alarm Level ( Low, Medium , High)
External Transducer Draft ( 0~99.9; 0 )
Salt Water ( OFF, ON )
Transducer Setup ( Show the menu for setting up the transducer)
Transmission Power Auto ( OFF, ON )
Transmission Power ( 0~10; 10 )
External KP ( OFF , ON)
Bottom Level ( -40~40; 0 )
Auto Gain Offset ( Multi-Sounder) ( -5~5; 0 )
Auto Gain Offset ( Side Scan) ( -5~5; 0 )
Auto Gain Offset ( Cross Section) ( -5~5; 0 )
STC (Side Scan) ( 0~10; 5 )
STC ( Multi-Sounder) ( 0~10; 5 )
TX Pulse ( Short1, Short2, Std , Long)
DFF-3D Monitoring
Set Hardware to Factory Default
Reset Default Settings
1
2
1