Suzuki LT-Z90, Owner'S Manual

Page: 85 / 111

6-26
FRONT AND REAR WHEEL
REMOVAL
FRONT
REAR
1. Park the vehicle on level ground
and set the parking brake.
2. Loosen the wheel nuts on the
wheel to be removed.
3. Lift up the front or rear end of the
vehicle by placing a jack or block
under the axle.
4. Remove the wheel nuts.
5. Remove the wheel. To reinstall the
wheel, reverse these steps. Use
the tightening torque chart to
determine the tightness of the
wheel nuts.
Tightening Torque
Front and Rear
55 N·m
5.5 kgf-m
40.0 lb-ft

WARNING
Failure to tighten the wheel nuts to
the specified torque can be haz-
ardous.
If the wheel nuts are not properly
tightened the wheel can come off,
causing an accident.
Be sure to tighten the wheel nuts
to the specified torque. If you do
not have a torque wrench or do
not know how to use one, ask
your authorized Suzuki dealer to
check the nuts.