Suzuki LT-Z90, Owner'S Manual

Page: 70 / 111

6-11
7. Reinstall the oil filter cover and
tighten the bolts securely.
8. Reinstall the drain plug and
tighten it securely. Pour about
1.05 L (1.1/0.9 US/Imp qt) of the
specified oil in the filler hole. (See
“FUEL AND OIL RECOMMENDA-
TIONS” section)
.
9. Start the engine (while the vehicle
is outside on level ground) and
allow it to idle for a few minutes.
10. Turn the engine off and wait for
three minutes. Recheck the oil
level. The oil level should be at the
“F” (full) mark. If it is lower than
the “F” mark, add oil until it
reaches the “F” mark. Inspect the
area around the drain plug and oil
filter cover for leaks.
CAUTION
Failure to use the correct oil can
damage your ATV.
Engine damage may occur if you
use oil that does not meet
Suzuki’s specifications.
Be sure to use the oil specified in
the FUEL AND OIL RECOMMEN-
DATIONS section.