Sutron Accububble 56-0131-50-1, Operation & Maintenance Manual

Page: 37 / 62

Command
Description Command Syntax
(command underlined) Sensor response (underlined)
"a" represents the
single-character address
MC4 Request
Standards lab
Calibration
Scale and
Offset with
CRC-16
(Version 2.0
and higher)
aMC4!
aD0! a0002
000 is the time in seconds until the
measurement is ready and 2 is the
number of values that can be collected
asoC
where, s is the scale calibration, o is the
offset calibration (psi), and C is the 3
character CRC.
MC5 Request
Quadrature
scale factor,
threshold,
step rate, and
operating
mode for the
unit with
CRC-16
(Version 2.0
and higher)
aMC5!
aD0! a0004
000 is the time in seconds until the
measurement is ready and 4 is the
number of values that can be collected
astrmC
where, s is the Quadrature scale, t is the
quadrature threshold, r is the quadrature
step rate in steps per second, and m is
the operating mode of the analog and
quadrature outputs, and C is 3 character
CRC.
MC6 Request
Temperature
and Pressure
Measurement
with CRC-16
(Version 2.0
and higher)
aMC6!
aD0! attt04
ttt is the time in seconds until the
measurement is ready and 04 is the
number of values that can be collected
a
service request
atupvC
where t is the temperature, u is the
temperature units, p is the pressure, v is
the pressure units, and C is the 3
character CRC. Use the XUT command
to set the temperature units and the XUP
command to set the pressure units.
MC7 Request
factory
calibration
Pressure and
Temperature
Measurement
with CRC-16
(Version 2.0
and higher)
aMC7!
aD0! attt02
ttt is the time in seconds until the
measurement is ready and 02 is the
number of values that can be collected
a
service request
aptC
where p is the pressure psi, t is the
temperature in degrees Celsius, and C is
3 character CRC.
Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, 21300 Ridgetop Circle, Sterling, Virginia 20166-6520
33