suprema BioStation 2, User Manual

Page: 21 / 41

System Setup
îï
Restart Device
The user can restart the device.
1
Press the ESC button then authenticate as an administrator.
2
Go to DEVICE > Restart Device, then press OK .
3
Press OK to restart the device. Press ESC to cancel.
Restore Default
Device settings, network settings, and operator levels will be reset.
1
Press the ESC button then authenticate as an administrator.
2
Go to DEVICE > Restore Default , then press OK.
Reset All Settings : You can reset all settings stored on the device. Press OK to reset all device settings. To cancel, press ESC .
Reset without Network Settings : You can reset all settings except network settings. Press OK to reset all settings except netwo
rk settings. To cancel, press ESC .
Factory Default : You can delete all the information saved in the device and the root certificate and restore default settings.
Delete the Root Certificate : You can delete the root certificate saved in the device.
3
If you proceed to restore the defaults, the device will restart.
NOTE
When you reset, the operator level will be reset as well. After resetting, make sure to set the operator level again.
Language setting will not change after resetting.
Factory Default menu can be used when the root certificate is saved in the device.
Delete the Root Certificate menu can be used only when the root certificate is saved in the device and Administrator has been
designated.
More Settings
Relay
You can set the open time and the input port of the exit button in the device. This option is useful when the device is used as a
standalone.
1
Press ESC and authenticate with the Admin level credential.
2
Select DEVICE > Relay , then press OK .
Relay : You can set whether relay is enabled or not. To set the open time and the input port of the exit button, set to Enabled .
Open Time : Set the duration for the door to remain open when standard user authentication has been carried out.
Exit Button : Select the input port where the exit button is connected.
3
To save settings, press OK .