Supero X9DRL-7F, User Manual

Page: 94 / 113

4-20
X9DRL-7F/X9DRL-EF Motherboard User’s Manual
Legacy OS Redirection
Use this feature to select the number of rows and columns used in Console
Redirection for legacy OS support. The options are 80x24 and
80x25 .
Putty Keypad
Use this feature to select function key and keypad setting on Putty. The options
are
VT100 , LINUX, XTERMR6, SCO, ESCN, and VT400.
Redirection After BIOS POST
If Always Enabled is selected, Legacy Console Redirection will be enabled for
Legacy OS after BIOS POST (Power-On Self Test) is completed. The options
are
Always Enabled , and BootLoader.
Serial Port for Out-of-Band Management/Windows Emergency Management
Services (EMS)
This item allows the user to configure Console Redirection settings to support Out-
of-Band Serial Port management.
Console Redirection
Select Enabled to use a COM Port selected by the user for Console Redirection.
The options are Enabled and
Disabled
.

Console Redirection Settings
This feature allows the user to specify how the host computer will exchange
data with the client computer, which is the remote computer used by the user.
Out-of-Band-Mgmt (Management) Port
Use this feature to select the port to be used for out-of-band management. The
options are
COM1 and COM2
Terminal Type
This feature allows the user to select the target terminal emulation type for Con-
sole Redirection. Select VT100 to use the ASCII character set. Select VT100+
to add color and function key support. Select ANSI to use the extended ASCII
character set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters
into one or more bytes. The options are ANSI, VT100,
VT100+ , and VT-UTF8.
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirec-
tion. Make sure that the same speed is used in the host computer and the client
computer. A lower transmission speed may be required for long and busy lines.
The options are 9600, 19200, 57600, and
115200
(bits per second).