Supero X9DRL-7F, User Manual

Page: 16 / 113

1-8
X9DRL-7F/X9DRL-EF Motherboard User’s Manual
IPMI 2.0
•
IPMI 2.0 supported by the WPCM450 BMC
Serial (COM) Port
•
Two (2) Fast UART 16550 Connections: 9-pin RS-
232 port
Peripheral
Devices
USB Devices
•
Four (4) USB ports on the rear I/O panel (USB 6/7,
USB 8/9),
•
Two (2) USB connections for front access (USB 0/1),
•
One (1) Type A USB connection for front access
(USB 4)
BIOS
•
128Mb SPI AMI BIOS
®
SM Flash BIOS
•
APM 1.2, PCI 2.3, ACPI 1.0/2.0/3.0/4.0, USB Key-
board, Plug & Play (PnP) and SMBIOS 2.3
Power
•
ACPI/ACPM Power Management
Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel
®
Intelligent Power Node Manager (Available
when the NMView Utility is installed and special
power supply used. See the note on Page 1-14.)
•
Management Engine
PC Health
PC Health/CPU Monitoring
Monitoring
•
Onboard voltage monitoring for +1.5V, +3.3V, 3.3V
Standby, +5V, +5V Standby, +12V, PSVA, PVTT,
CPU Core, Memory, Chipset, and Battery Voltages.
•
CPU/System overheat LED and control
•
CPU Thermal Trip support
•
CPU Thermal Design Power (TDP): support up to
130W (See Note 1 next page)
•
Thermal Monitor 2 (TM2) support
Fan Control
•
Fan status monitoring via IPMI connections
•
Low noise fan speed control
System
Management
•
PECI (Platform Environment Configuration Interface)
2.0 support
•
UID (Unit Identification)/Remote UID
•
System resource alert via SuperDoctor III