Supero X9DRL-7F, User Manual

Page: 91 / 113

Chapter 4: AMI BIOS
4-17
Network Stack
When this featurer is set to Enabled, both PXE (Preboot Execution Environment)
and UEFI (Unified Extensible Firmware Interface) will be enabled for network stack
support. The options are Enabled and
Disabled
.

Super IO Configuration
Super IO Chip
Displays the Super IO chip type.

COM 1 Configuration
Serial Port
Select Enabled to enable a serial port specified by the user. The options are En-
abled and Disabled.
Device Settings
This item displays the settings of Serial Port 1.
Change Settings
This option specifies the base I/O port address and the Interrupt Request address
of COM Port 1. The options are Auto , IO=3F8h; IRQ=4; IO=3F8h; IRQ=3; IO=2F8h;
IRQ=3; IO=3E8h; IRQ=5; IO=2E8h; IRQ=7; IO=3F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12;
IO=2F8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; IO=3E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12; and
IO=2E8h; IRQ=3, 4, 5, 6, 7, 10, 11, 12.
Device Mode
Use this feature to select the desired mode for a serial port specified. The options
are Normal and High Speed.

SOL (Serial_Over_LAN) Configuration
SOL Serial Port
Select Enabled to enable a serial port (Serial Port 2) specified by the user for SOL
use. The options are Enabled and Disabled.
Device Settings
This item displays the settings of Serial Port 2.