Supero X7SBA User Manual Download Page 98

Page: 98 / 126

C-10

X7SBA User's Manual

C-2 Installing the Windows XP/2000/2003 for systems

with

RAID

Functions

Installing a New Windows XP/2000/2003 Operating System

a. Insert the Microsoft Windows XP/2000/2003 Setup CD in the CD Driver, and

the system will start booting up from CD.

b. Press the <F6> key when the message-" Press F6 if you need to install a third

party SCSI or RAID driver" displays.

c. When the Windows XP/2000/2003 Setup screen appears, press "S" to specify

additional device(s).

d. Insert the driver diskette-"Intel AA RAID XP/2000/2003 Driver for ICH9R into

Drive A: and press the <Enter> key.

e. Choose the Intel(R)82801GR/GH

SATA RAID Controller

from the list indicated

in the XP/2000/2003 Setup Screen, and press the <Enter> key.

f. Press the <Enter> key to continue the installation process. (If you need to

specify any additional devices to be installed, do it at this time.) Once all devices

are speciﬁ ed, press the <Enter> key to continue with the installation.

g. From the Windows XP/2000/2003 Setup screen, press the <Enter> key. The

XP/2000/2003 Setup will automatically load all device ﬁ les and then, continue the

Windows XP/2000/2003 installation.

h. After the Windows XP/2000/2003 Installation is completed, the system will

automatically reboot.

i. Insert Supermicro's CD that came with the package into the CD Drive during

system reboot, and the following screen will appear:

Note

: the current version of the ICH9R SATA RAID Utility can only support the

Windows XP/2000/2003 Operating System.

Summary of Contents for X7SBA































































































































Search results

Summary of Contents for X7SBA

Reviews:

Related manuals for X7SBA

Brands by name

Popular brands

Supero X7SBA, User Manual

Search results

Summary of Contents for X7SBA

Reviews:

Related manuals for X7SBA

Brands by name

Popular brands