Supero X7SBA, User Manual

Page: 56 / 126

4-6
X7SBA User's Manual
Boot Features
Access the submenu to make changes to the following settings.
Quiet Mode
This setting allows you to Enable or Disable the graphic logo screen during
boot-up.
QuickBoot Mode
If enabled, this feature will speed up the POST (Power On Self Test) routine by
skipping certain tests after the computer is turned on. The settings are Enabled
and Disabled. If Disabled, the POST routine will run at normal speed.
ACPI Mode
Select Yes to use the ACPI (Advanced Confi guration and Power Interface) power
management feature on your system. The options are Yes and No.
Power Button Behavior
If set to Instant-Off , the system will power on or power off immediately as soon
as the user hits the power button. The options are Instant-Off and 4-Second
Override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and Off .
Resume On PME#
Select On to “wake your system up” from the PME# of PCI slots. The options
are On and Off.
PS2 Keyboard (KB)/Mouse Wake Up
Select Enable to “wake your system up” from the S1, S4 or S5 state. The default
setting is Disabled .
USB Wake Up
Select Enable to allow your system to be “awakened” from the S3 or S4 state
with a USB device. If this feature is set to Enabled, you will also need to enable
the JPUSB1 or JPUSB2 jumper by closing pins 1-2. (Please refer to Pg. 1-5 and
Chapter 2 for more details). The default setting is Disabled .