Supero X7SBA, User Manual

Page: 11 / 126

Chapter 1: Introduction
1-5
X7SBA Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear (See Chapter 2)
JI
2
C1/JI
2
C2 I
2
C (SMB) Bus to PCI slots (Open/Open: Disabled)
JPG1 Video Enable Pins 1-2 (Enabled)
JPL1/JPL2 Giga-bit LAN 1/2 Enable Pins 1-2 (Enabled)
JWD Watch Dog Time-out Pins 1-2 (Reset)
JPUSB1 Back Panel USB Wake Up Pins 1-2 (Enabled)
JPUSB2 Front Panel USB Wake Up Pins 2-3 (Disabled)
Connector Description
Alarm Reset Alarm Reset Connection (JAR)
COM1, COM2 COM Port 1 & COM 2 Header
Fans 1-6 System Fan Headers (Fans 1-5), Fan6: CPU Fan
Floppy Connector Floppy Disk Connector
FP Control Front Panel Control Header (JF1)
I-SATA0~I-SATA5 Intel SATA Headers #0~#5 (JS1-JS6)
JD1 Speaker Header (Pins 3-4: Internal Buzzer Enable,
Pins 1-4: External Speaker Cable)
JL1 Chassis Intrusion Header
JLED1 Power LED Header
JOH Overheat LED Header
JPW1 ATX 24-Pin Power Connector
JPW2 12V 8-pin Power Connector (Required)
JWOL Wake On LAN Header
JWOR Wake On Ring header
KB/Mouse PS/2 Keyboard/Mouse Connector (J28)
LAN 1/LAN 2 Ethernet RJ45 (Gigabit LAN) Port1/Port2 Connectors
Power Fail Power Failure Connector (JPWF)
Printer Parallel Port (Printer) Header
SMB PS Power Supply SMbus (I2C)
SIMSO IPMI SIMSO IPMI 2.0 Socket
SPKR1 Internal Buzzer
T-SGPIO 1/2 Serial General Purpose I/O Headers 1/2 (J29/J30)
USB 0/1 Backpanel USB Ports 0/1 (J11)
USB 6/7, 8/9 Front Panel USB headers #6/#7 (J44), #8/#9 (J45)
USB 11 Front Accessible USB Port 11 (JUSB48)
VGA VGA Connector (J7)
LED Indicator Description
LE 1 Onboard Standby PWR warning LED Indicator