Supero X7SBA, User Manual

Page: 22 / 126

2-4
X7SBA User's Manual
South Center Edge
North Center Edge
Socket Lever
CPU in the CPU socket
Plastic cap is released
from the load plate if
CPU properly installed.
5. Use your thumb and your index fi nger
to hold the CPU at the North Center Edge
and the South Center Edge of the CPU.
6. Align Pin 1 of the CPU with Pin 1 of the
socket. Once aligned, carefully lower the
CPU straight down to the socket. (Do not
drop the CPU on the socket. Do not move
the CPU horizontally or vertically. Do not
rub the CPU against the surface or against
any pins of the socket to avoid damage to
the CPU or the socket.)
7. With the CPU inside the socket, inspect
the four corners of the CPU to make sure
that the CPU is properly installed.
8. Use your thumb to gently push the lever
down and lock it in the hook.
9. If the CPU is properly installed into the
socket, the plastic cap will be automatically
released from the load plate when the le-
ver is pushed into the hook. Remove the
plastic cap from the motherboard.
Warning : Please keep the plastic
cap. The motherboard and the CPU
must be shipped with the plastic cap
properly installed to protect the CPU
pins. Shipment without the CPU plas-
tic cap properly installed will void the
warranty.
!