Supero SuperServer 5012B-6, User Manual

Page: 88 / 112

7-14
S
UPER
S
ERVER 5012B-6/5012B-E Manual
RxD, TxD Active
This setting allows the user to set the settings for the function of "RxD,
TxD Active." The options are "Hi, Hi", " Hi, Lo ", "Lo, Hi", and "Lo, Lo".
IR Transmission Delay
If "Enabled", the transmssion of IR (infrared) signals will be delayed. The
options are " Enabled " and "Disabled".
UR2 Duplex Mode
This setting set the mode for the UR2 Duplex Mode. The options are "Full"
and " Half ".
Use IR Pins
This item sets the usage of IR pins. The options are "RxD2, TxD2" and " IR-
Rx2Tx2 ".
Onboard Parallel Port
This setting allows the user to set the address and the corresponding IRQ
for the onboard parallel port. The options are "Disabled", " 378/IRQ7 ", "278/
IRQ5" and "3BC/IRQ7".
Parallel Port Mode
This setting sets the mode for the onboard Parallel port. The options are
"SPP," "EPP", " ECP " and "ECP+EPP".
EPP Mode Select
This setting allows the user to select the EPP port type. The options are
"EPP 1.9" and " EPP 1.7 ".
ECP Mode Use DMA
This setting allows the user to select the DMA channel for the ECP mode
(port) to use. The options are "1" and " 3 ".