Supero SuperServer 5012B-6, User Manual

Page: 57 / 112

Chapter 5: Advanced Motherboard Setup
5-19
SCSI LED Indicator
(P4SBR only)
The SCSI LED connector is used
to provide an LED indication of
SCSI activity. See the table on
the right for pin definitions.
Pin
Number
1
2
3
4
Definition
Positive
Negative
Negative
Positive
SCSI LED Pin Definitions
(SCSI LED)
Wake-On-Ring
The Wake-On-Ring header is des-
ignated as "JWOR". This function
allows your computer to receive
and be "awakened" by an incom-
ing call when in the suspend state.
See the table on the right for pin
definitions. You must also have a
WOR card and cable to use WOR.
Pin
Number
1
2
Definition
G round
W ake-up
W ake-O n-Ring Pin
Definitions (JW O R)
Chassis Intrusion
The Chassis Intrusion header is lo-
cated on JL1. See the table on the
right for pin definitions.
Pin
Number
1
2
Definition
Intrusion Input
Ground
Chassis Intrusion
Pin Definitions (JL1)
Speaker
A header for an external speaker
is located near JWOR. If using the
onboard speaker, pins 1 and 2
should be closed with a jumper. If
y o u w i s h t o u s e a n e x t e r n a l
speaker, you may connect it to
this header. See the table on the
right for pin definitions.
Speaker Connector P in
Definitions (Speaker)
Pin
Number
1
2
3
4
Function
+
Key
Definition
Red wire, Sp eaker data
No conn ection
Key
Speaker data
PWR LED
Attach an LED to the Power LED
connection to be informed that
power is being supplied to the
motherboard. Refer to the table on
the right for pin definitions.
Pin
Number
1
2
3
Definition
+5V
Control
Control
Power LED Pin
Definitions (PW R LED)