Supero SuperServer 5012B-6, User Manual

Page: 56 / 112

5-18
S
UPER
S
ERVER 5012B-6/5012B-E Manual
Infrared Connector
The infrared connector is located
at J45. See the table on the right
for pin definitions. Refer to the
Technical Support section of our
web page for information on the
infrared devices you can connect
to the system.
Pin
Number
1
2
3
4
5
Definition
+5V
Key
IRRX
Ground
IRTX
Infrared Pin
Definitions
(J45)
Pin
Number
1
2
3
Definition
+5V Standby
Ground
W ake-up
W ake-On-LAN Pin
Definitions (W OL)
Wake-On-LAN
The Wake-On-LAN header is des-
ignated as "WOL". Refer to the
table on the right for pin defini-
tions. You must enable the LAN
Wake-Up setting in BIOS to use
this function. (You must also have
a LAN card with a Wake-on-LAN
connector and cable to use this
feature.)
LAN1/LAN2 Ports
Two Ethernet ports (designated
LAN1 and LAN2) are located be-
s i d e t h e V G A p o r t o n t h e I / O
backplane. These ports accept
RJ45 type cables. Two LEDs on
each indicate a successful con-
n e c t i o n ( y e l l o w ) a n d a c t i v i t y
(green).
RJ45 Ethernet Port
Fan H eader Pin Definitions
(C PU/CHS/OH Fans)
Pin
Number
1
2
3
Definition
Ground (black)
+12V (red)
Tachometer
Caution: These fan headers
are D C power.
Fan Headers
The motherboard has CPU, chas-
sis and overheat fan headers des-
ignated CPU, CHS F1, CHS FAN2
and OH FAN, respectively. See
the table on the right for pin defini-
tions.