Supero SuperServer 5012B-6, User Manual

Page: 45 / 112

Chapter 5: Advanced Motherboard Setup
5-7
5-6 Installing Memory
1. M e m o r y s u p p o r t
The P4SBR/P4SBE has three PC 133 SDRAM sockets that support up to 3
GB of low profile, PC133/PC100 unbuffered SDRAM. ECC type memory is
supported. PC133 and PC100 memory are both fully supported at their
respective speeds.
2. Installing memory modules
Insert each memory module vertically into a DIMM slot. Pay attention to
the two notches along the bottom of the module to prevent inserting the
module incorrectly. Gently press down on the DIMM module until it snaps
into place in the slot (see Figure 5-5).
!
CAUTION! Exercise extreme care when install-
ing or removing DIMM modules to prevent any
possible damage.
To Install: Insert module vertically and press down until it snaps into
place. Pay attention to the bottom notches.
To Remove: Use your thumbs to gently push each release tab outward
to free the DIMM from the slot.
Figure 5-5. Side View of DIMM Installation into Slot