Supero SuperServer 4048B-TRFT, User Manual

Page: 74 / 148

5-26
SUPERSERVER 4048B-TRFT USER'S MANUAL
Management Engine (ME) Recovery
Use jumper JPME1 to select ME Firmware
Recovery mode, which will limit resource
allocation for essential system operation
only in order to maintain normal power
operation and management. In the single
operation mode, an online upgrade will be
available via Recovery mode. The default
setting is Normal. Refer to the table on the
right for jumper settings.
ME Recovery
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 Normal
Pins 2-3 ME Recovery
Manufacturer Mode Select
Close pin 2 and pin 3 of jumper JPME2
to bypass SPI
fl ash security and force
the system to operate in the Manufacturer
mode, allowing the user to
fl ash the system
fi rmware from a host server for system-
setting modi fi cations. The default setting is
Normal. Refer to the table on the right for
jumper settings.
Manufacturer Mode
Select
Jumper Settings
Jumper Setting De fi nition
Pins 1-2 Normal
Pins 2-3 Manufacturer Mode