Supero SuperServer 4048B-TRFT, User Manual

Page: 10 / 148

1-2
SUPERSERVER 4048B-TRFT USER'S MANUAL
1-2 Serverboard Features
At the heart of the SuperServer 4048B-TRFT lies the X10QBI, a quad processor
serverboard based on the Intel® C602J chipset and designed to provide maximum
performance. The X10QBI acts as a baseboard, into which an I/O card and memory
cards may be installed.
The sections below cover the main features of the X10QBI serverboard (see Figure
1-1 for a block diagram of the chipset).
Processors
The X10QBI supports four Intel® Xeon® E7-4800 V2 series processors (Socket R1
LGA 2011). Please refer to the serverboard description pages on our web site for a
complete listing of supported processors (
www.supermicro.com ).
Memory
The X10QBI uses eight memory cards that install into the eight memory slots on
the serverboard. Two cards are assigned to each CPU as follows: SMI slots P1M1/
P1M2 for CPU1, SMI slots P2M1/P2M2 for CPU2, SMI slots P3M1/P3M2 for CPU3
and SMI slots P4M1/P4M2 for CPU4.
Each memory card may be populated with up to 12 DIMMs. With all cards fully
populated, the system will support up to a total of 6 TB of DDR3-1600/1333/1066/800
ECC RDIMM/LDIMM memory. See Chapter 5 for details.
Note:
Check the Supermicro website ( www.supermicro.com ) for the latest memory
support information.
Serial ATA
A SATA controller is integrated into the C602J chipset to provide two SATA 3.0
and four SATA 2.0 ports, which support RAID 0, 1, 5 and 10. The SATA drives are
hot-swappable units.
PCI Expansion Slots
The X10QBI serverboard has four PCI Express 3.0 x16 slots and seven PCI Express
3.0 x8 slots.