Supero SuperServer 4048B-TRFT, User Manual

Page: 118 / 148

7-28
SUPERSERVER 4048B-TRFT USER'S MANUAL
PSMI Support
Select Enabled for Power Supply Management Interface (PSMI) support. The
options are Enabled and
Disabled
.
VMSE Clock Stop
Select Enabled to de-activate the clock driver for the Intel Scalable Memory
Interconnect 2 (Intel SMI 2) controller. The options are Enabled and
Disabled
.
Safe MC (Micro Code) BGF (Buffer Generation First-in-First-Out) PSV
Select Enabled to use the Micro-Code Safe mode to allow the onboard power
control mechanism to supply power to the memory buffer on the on-demand basis
in an effort to save power consumption. The options are Enabled and
Disabled
.

Memory Topology
This item displays the status of each DIMM module as detected by the BIOS.
•
Node
•
Channel
•
DIMM Frequency

Memory RAS (Reliability_Availability_Serviceability)
Confi guration
Use this submenu to con fi gure the following Memory RAS settings.
Memory RAS Confi guration Setup
Socket 0 Branch 0/Socket 0 Branch1/Socket 1 Branch 0/Socket 1
Branch1/Socket 2 Branch 0/Socket 2 Branch1/Socket 3 Branch 0/Socket
3 Branch1/
Select Enable to enable the memory module installed on the socket speci fi ed
by the user. The default setting is
Enable
and Disable.
Migration Spare
Use this feature to set the bit-mask of the riser card that is designated as a spare
riser. The default setting is
0
.
Current Memory Speed
This item displays the current memory speed.