Supero SUPER S2DG2, User'S And Bios Manual

Page: 76 / 96

BIOS User's Manual
5-18
System Overheat Warning
The settings for this option are
Enabled
or
Disabled
. When set to
Enabled,
this option allows the user to set an overheat warning temperature.
Set Overheat Warning Temperature
Use this option to set the overheat warning temperature. The settings are
25°C through 99°C in 1°C intervals . Note: The Optimal and Fail-Safe
default settings are 63°C .
H/W Monitor In0 (CPU 1)
H/W Monitor In1 (CPU 2)
H/W Monitor In2 (+3.3V)
H/W Monitor In3 (+5V)
H/W Monitor In4 (+12V)
H/W Monitor In5 (-12V)
H/W Monitor In6 (-5V)
CPU1 Fan
CPU2 Fan
Thermal Control Fan
The above features are for PC Health Monitoring. The motherboards with
W83781D have seven on-board voltage monitors for the CPU core, CPU I/O,
+3.3V, +5V, -5V, +12V, and -12V, and three fan status monitors.
On-Board FDC
This option enables the FDC (Floppy Drive Controller) on the motherboard.
The settings are Disabled , or Enabled .
On-Board Serial Port A
This option specifies the base I/O port address of serial port 1. The settings
are Auto (AMIBIOS automatically determines the correct base I/O port
address), Disabled , 3F8h/ COM1, 2F8h/COM2 , 3E8h/COM3 or 2E8h/COM4 .
On-Board Serial Port B
This option specifies the base I/O port address of serial port 2. The settings
are
Auto
(AMIBIOS automatically determines the correct base I/O port
address),
Disabled
,
3F8h/COM1
,
2F8h/COM2
,
3E8h/COM3
or
2E8h/COM4
.
Serial Port B Mode
The settings for this option are Normal, IrDA or ASK IR . When set to IrDA,
the IR Duplex Mode becomes available and can be set to either Half or Full.
When set to ASK IR, the IrDA Protocol becomes available and can be set to
1.6 us or 3/16.