Supero SUPER S2DG2, User'S And Bios Manual

Page: 38 / 96

SUPER S2DG2/S2DGU/S2DGE/S2DGR
Manual
2-6
PW_ON Connector
The header for the PW_ON connec-
tor is located on pins 9 and 10 of
JF2. Momentarily contacting both
pins will power on/off the system.
The user can also configure this but-
ton to function as a suspend button.
(See BIOS setup information on
page 5-12). To turn off the power
when set to suspend mode, hold
down the power button for at least 4
seconds. See Table 2-5 for pin defi-
nitions.
Reset Connector
The header for the reset connector is
located on pins 12 and 13 of JF2.
This is used for the hardware reset
switch on the computer case. See
Table 2-6 for pin definitions.
Pin
N u m b e r
9
1 0
Definition
P W _ O N
G r o u n d
Table 2-5
PW_ON Header
JF2
Table 2-7
Hard Drive LED
Header
JF1
Pin
N u m b e r
1
2
3
4
Definition
+ 5 V
HD Active
HD Active
+ 5 V
Pin
N u m b e r
1 2
1 3
Definition
G r o u n d
R e s e t
Table 2-6
Reset Header
JF2
Hard Drive LED
The header for the hard drive LED is
located on pins 1 to 4 of JF1. Attach
the hard drive LED cable to pins 1
and 2. See Table 2-7 for pin defini-
tions.
Keylock/Power LED
Connector
The header for the keylock/power
LED connector is located on pins 5
to 9 of JF1. Pins 5 through 7 are for
the power LED and pins 8 and 9 are
for the keylock. See Table 2-8 for
pin definitions.
Pin
N u m b e r
5
6
7
8
9
Function
V C C + 5 V
V C C + 5 V
G r o u n d
G r o u n d
Table 2-8
Keylock/Power LED Header
JF1
Definition
Red wire, LED power
Red wire, LED power
LED control
Keyboard inhibit
Black wire