Supero SUPER S2DG2, User'S And Bios Manual

Page: 62 / 96

BIOS User's Manual
5-4
HDD, 3rd IDE-HDD, 4th IDE-HDD, Floppy, ARMD-FDD, ARMD-HDD, ATAPI
CD ROM, SCSI, Network
or
I
2
0
. The options for the 2nd Boot Device are
Disabled, 1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD, 4th IDE-HDD, Floppy,
ARMD-FDD, ARMD-HDD or ATAPI CD ROM
. The options for the 3rd Boot
Device are Disabled, 1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD, 4th IDE-
HDD, Floppy, ARMD-FDD, ARMD-HDD or ATAPI CD ROM .
1st IDE-HDD, 2nd IDE-HDD, 3rd IDE-HDD and 4th IDE-HDD are the four hard
disks that can be installed by the BIOS. 1st IDE-HDD is the first hard disk
installed by the BIOS, 2nd IDE-HDD is the second hard disk, and so on. For
example, if the system has a hard disk connected to Primary Slave and
another hard disk to Secondary Master, then 1st IDE-HDD will be referred to
as the hard disk connected to Primary Slave and 2nd IDE-HDD will be
referred to as the hard disk connected to the Secondary Master. 3rd IDE-
HDD and 4th IDE-HDD are not present. Note that the order of the initializa-
tion of the devices connected to the primary and secondary channels are
Primary Master first, Primary Slave second, Secondary Master third, and
Secondary Slave fourth.
The BIOS will attempt to read the boot record from 1st, 2nd, 3rd and 4th boot
device in the selected order until it is successful in reading the booting
record. The BIOS will not attempt to boot from any device which is not
selected as the boot device.
Try Other Boot Device
This option controls the action of the BIOS if all the selected boot devices
failed to boot. The settings for this option are Yes or No . If Yes is selected
and all the selected boot devices failed to boot, the BIOS will try to boot from
the other boot devices (in a predefined sequence) which are present but not
selected as boot devices in the setup (and hence not yet been tried for
booting). If selected as
No
and all selected boot devices failed to boot, the
BIOS will try not to boot from the other boot devices which may be present
but not selected as boot devices in setup.
Initial Display Mode
This option determines the display screen with which the POST is going to
start the display. The settings for this option are BIOS or Silent . If selected
as BIOS, the POST will start with the normal sign-on message screen. If
Silent is selected, the POST will start with the silent scree
n.
Display Mode at Add-on ROM Init
This option determines the display mode during add-on ROM (except Video
add-on ROM) initialization. The settings for this option are Force BIOS or