Supero SUPER S2DG2, User'S And Bios Manual

Page: 78 / 96

BIOS User's Manual
5-20
Pri Master
Pri Slave
Sec Master
Sec Slave
Select these options to configure the drive named in the option. The setting
for Primary Master and Secondary Slave is Auto . The Primary Slave and
Secondary Master are Not-Installed .
5-3 Change User Password
Change Supervisor Password
The system can be configured so that all users must enter a password every
time the system boots or when the AMIBIOS Hiflex setup is executed. You
can set either a Supervisor password or a User password. If you do not want
to use a password, just press <Enter> when the password prompt appears.
The password check option is enabled in the Advanced Setup by choosing
either Always or Setup . The password is stored in CMOS RAM. You can
enter a password by typing the password on the keyboard, selecting each
letter via the mouse, or selecting each letter via the pen stylus. Pen access
must be customized for each specific hardware platform.
When you select Supervisor or User, AMIBIOS prompts for a password. You
must set the Supervisor password before you can set the User password.
Enter a 1-6 character password. The password does not appear on the
screen when typed. Retype the new password as prompted and press
<Enter>. Make sure you write it down. If you forget it, you must drain
CMOS RAM and reconfigure.
5-4 Change Language Setting
Note: The Optimal and Fail-Safe default settings for this option are
English.