Supero SUPER P4STA, User Manual

Page: 66 / 92

S
UPER P4STA User's Manual
4-18
BIOS
4-5 PCI/PnP Configurations
When the Item "PCI/PnP" is highlighted on the main menu bar, hit
the <Enter> key to activate the following screen:
[Reset Configuration Data]
If you have installed a new add-on device and this add-on device has
caused conflicts in system configuration and has resulted in system boot-
upfailure, then, select "Enabled" to reset "Extended System Configuration
Data" (ESCD) for the OS to reboot the system, The settings are
"Enabled" and "Disabled". The default setting is"Disabled".
[Resources Controlled By]
The Award BIOS can automatically configure all the boot devices and all Plug
and Play compatible devices. However, if this item is set to "Auto (ESCD)",
the user is not able to set the IRQ DMA and memory address, since the
Award BIOS will automatically assign the values to these fields. The
settings are "AUTO (ESCD)" and "Manual". The default setting is "AUTO
(ESCD)".
[PCI/VGA Palette Snoop]
For best performance of the system, this item has been pre-set to "Disabled"
by the manufacturer. The settings are "Enabled" and "Disabled". The
default setting is"Disabled".