Supero SUPER P4STA, User Manual

Page: 27 / 92

Chapter 2: Installation
2-3
5. Lift the CPU socket lever.
Socket Lever
6. Install the CPU in the socket. Make sure
that Pin 1 (the corner with a triangle) of the
CPU is seated on Pin 1 of the socket (the
corner with a triangle).
Pin 1
7. Press down the lever
into its lock position until
you hear a click sound.
Socket Lever in
its lock position
4. Secure another reten-
tion into its position by
repeating Step 3.
8. Apply the proper amount of thermal glue on the CPU die.
9. Place the heat sink on
the top of the CPU.
Heat sink
CPU
10.Secure the heat sink in its
proper position by locking the
retention clips into the proper
position.
11. Connect the cord of CPU
Fan to the CPU Fan Connec-
tor.
CPU Fan
Connector
CPU Fan
Cord
Retention Clip