Supero SUPER P4STA, User Manual

Page: 34 / 92

2-10
S
UPER P4STA User's Manual
Pin
N u m b e r
1
2
3
Definition
+ 5 V S t a n d b y
G r o u n d
W a k e - u p
Table 2-11
Wake-On-LAN Pin
Definitions (WOL)
Wake-On-LAN
The Wake-On-LAN header is lo-
cated on WOL. Refer to Table 2-
11 for pin definitions. You must
enable the LAN Wake-Up setting in
BIOS to use this function. (You
must also have a LAN card with a
Wake-on-LAN connector and cable
to use this feature.)
Universal Serial Bus (USB)
Two Universal Serial Bus connec-
tors (USB0 and USB1) are located
on J18 and J19. See Table 2-9 for
pin definitions. The P4STA also
p r o v i d e s s u p p o r t f o r t w o a d d i -
tional USB ports: USB2 is a header
located near the IDE connectors
and provides easy front side chas-
sis access (cable not included).
USB3 is incorporated into the CNR
slot - the CNR card you plug in
here should have a USB port.
Table 2-9
Universal Serial Bus Pin Definitions
Pin# Definition
1 +5V
2 P0-
3 P0+
4 Ground Pin# Definition
1 +5V
2 P0-
3 P0+
4 Ground
J18
J19
Serial Ports
Two connectors, for the COM1
and COM2 serial ports, are
provided on your board. See
Table 2-10 for pin definitions.
Table 2-10
Serial Port Pin Definitions
Pin Number Definition
1 D C D
2 D S R
3 Serial In
4 R T S
5 Serial Out
Pin Number Definition
6 C T S
7 D T R
8 RI
9 G r o u n d
10 N C
(J20)
Pin
N u m b e r
1
2
3
4
5
Definition
+ 5 V
P O -
P O +
G r o u n d
K e y
(*Note: NC indicates no-connection.)
ATX PS/2 Keyboard and
PS/2 Mouse Ports
The ATX PS/2 keyboard and the
PS/2 mouse are located on J17.
See Table 2-8 for pin definitions.
(The mouse port is above the key-
board port. See Figure 2-3 for lo-
cations.)
Table 2-8
PS/2 Keyboard
and Mouse Port
Pin Definitions
(J17)
Pin
N u m b e r
1
2
3
4
5
6
Definition
D a t a
N C
G r o u n d
V C C
C l o c k
N C
Ground
Pin Number Definition
1 D C D
2 Serial In
3 Serial Out
4 D T R
5 G r o u n d
Pin Number Definition
6 D S R
7 R T S
8 C T S
9 RI
10 N C *