Supero SUPER P4STA, User Manual

Page: 36 / 92

2-12
S
UPER P4STA User's Manual
2-7 Jumper Settings
Explanation of
Jumpers
To modify the operation of the moth-
erboard, jumpers can be used to
choose between optional settings.
Jumpers create shorts between two
pins to change the function of the
connector. Pin 1 is identified with a
square solder pad on the printed cir-
cuit board. See the motherboard
layout pages for jumper locations.
C o n n e c t o r
P i n s
J u m p e r
C a p
Setting
Pin 1-2 short
Rambus Bus Speed
The Rambus speed is set with JP2
and JP2A1. Table 2-16 displays
the settings for these two jump-
ers. The CPU speed can also be
changed by software control in
BIOS (see CPU Speed setting).
The CPU Speed setting will show
you the actual CPU speed for each
FSB speed option selected.
N o t e : I f t h e s y s t e m d o e s n o t
reboot after changing the CPU
speed, 1) clear CMOS and reboot
(as described on the next page)
a n d t h e n s e t t h e c o r r e c t C P U
speed with the BIOS setting men-
tioned above.
3 2 1
3 2 1
Table 2-16
Front Side Bus Speed Jumper Settings
(JP2, JP2A1)
JP2
1-2
2-3
Open
JP2A1
1-2
Open
Open
Rambus CLK
Auto
300 MHz
400 MHz
* Note: The Auto setting allows the CPU
to set the speed.
*Note: The Auto setting allows the System to set
the speed.