Supero SUPER P4STA, User Manual

Page: 51 / 92

Chapter 4: Award BIOS
4-3
BIOS
Main BIOS Setup Menu
Main Setup Features
[Date/Time]
Set the system date and time. Key in the correct information in the fields
when the options of "Month, DD, YYYY" and "HH:MM:SS" appear in the
screen. Press the "Enter" key to save the data.
[Drive A/Drive B]
These options allow the user to set the type of floppy disk drive installed in
the system. The settings are: None, 360K, 5.25in, 1.2M, 5.25in, 720K, 3.5in,
1.44M, 3.5in, 2.88M, 3.5in.
[Swap Floppy Drive]
These options allow the user to swap the names of floppy disk drives
installed in the system, if there are two floppy disk drives installed on the
main board. The settings are: Disabled and Enabled. The default setting is
"Disabled".
[IDE Primary Master/IDE Primary Slave/IDE Secondary Master/IDE
Secondary Slave]
These options allow the user to set the parameters of the IDE Primary
Master/Slave and IDE Secondary Master/Slave slots. Hit "Enter" to activate
the following sub-menu screen for detailed options of these items. Set the
correct configurations accordingly. The items included in the sub-menu are
listed below: