Supero SUPER P4STA, User Manual

Page: 13 / 92

Chapter 1: Introduction
1-5
P4STA Quick Reference
Jumpers Description Default Setting
JBT1 CMOS Clear Pins 1-2 (Normal)
J2/J2A1 Memory Speeds (see the table below)
JP4 AC97 Audio Pins 1-2 (Enabled)
JPWAKE Keyboard Wake-Up Pins 1-2 (Disabled)
Connectors Description
CD1 Audio CD Input (large connector)
CD2 Audio CD Input (small connector)
CNR Communications/Networking Riser
COM1/COM2 COM1/COM2 Serial Port Connector
CPU FAN CPU Fan Header
Chassis Fan Chassis Fan Header
Overheat Fan Thermal Control Fan Header(OH Backup
Fan) GAME Game Port
J2, J3, J4, J5 Memory (RIMM) Slots
J6, J7 IDE Hard Disk Drive Connectors
JP5 Floppy Disk Drive Connector
*J21, J24(See Notes)ATX 12V Power Connector (1: 24-pin,1: 4pin)
J17
PS/2 Keyboard/Mouse
J18, J19, J20 Universal Serial Bus Ports
J15 Parallel Printer Port
JF1, JF2 Front Control Panel
JL1 Chassis Intrusion Header
JOH Overheat LED
JWOR Wake-On-Ring Header
LINE IN Audio In Connector
LINE OUT Audio Out (Speaker) Connector
MIC Microphone Input
USB3 Universal Serial Bus Port #3
WOL Wake-on-LAN Header
JP2 JP2A1 RAMBUS
1-2 1-2 AUTO
2-3 OPEN 300 MHZ
OPEN OPEN 400MHZ
*Notes:1. J24 4-pin connector must be connected to meet the
safety requirement of the ATX 12 V Spec. unless you have a SSI
24-pin power supply. (If you have a SSI 24-pin Power Supply, you
need to populate J21.) 2. Also see chapter 2 for detailed
information on Jumpers, I/O ports and JF1/JF2-Front
Panel Connectors (Pg.2-6). Jumpers not indicated are for test
purposes only.