Supero SUPER P4SDA+, User Manual

Page: 55 / 92

Chapter 4: AwardBIOS
4-3
Main BIOS Setup Menu
Date/Time
Set the system date and time. Key in the correct information in the "mm",
"dd" and "yy" fields. Press the "Enter" key to save the data.
Drive A/Drive B
These settings allow the user to set the type of floppy disk drive installed
in the system. The options are "None", "360K, 5.25 in", "1.2M, 5.25 in",
"720K, 3.5 in", "1.44M, 3.5 in" and "2.88M, 3.5 in". Default settings are
"1.44, 3.5" in for Drive A and "None" for Drive B.
Swap Floppy Drive
This setting allows the user to swap the designation (A and B) of the floppy
disk drives installed in the system (if there are two floppy disk drives
installed on the mainboard). The options are "Disabled" and "Enabled".
IDE Primary Master/IDE Primary Slave/IDE Secondary Master/IDE
Secondary Slave
These options allow the user to set the parameters of the IDE Primary
Master/Slave and IDE Secondary Master/Slave slots. Press "Enter" to
activate the following sub-menu screen for detailed options of these items.
Set the correct configurations accordingly. The items included in the sub-
menu are listed below: