Supero SUPER P4SDA+, User Manual

Page: 67 / 92

Chapter 4: AwardBIOS
4-15
4-4.3 Integrated Peripherals
When the item "Integrated Peripherals" is highlighted, press the <Enter> key
to activate the following sub-menu screen.
Onboard FDC Controller
Select "Enabled", if your system has a floppy disk controller (FDC) installed
on the main board and you wish to use it. The settings are "Enabled" and
"Disabled".
Onboard Serial Port 1/Port 2
This setting allows the user to set the address and the corresponding IRQ
for the Serial Port1 and Serial Port 2. The options are "Disabled" , "3F8/
IRQ4", "2F8/IRQ3", "3E8/IRQ4", "2E8/IRQ3", and "Auto". The default setting
for Serial Port1 is "3F8/IRQ4" and the default for Port 2 is is "2F8/IRQ3".
UART Mode Select
This setting allows the user to select the UART mode for BIOS. The options
are "IrDA", "ASKIR" ans "Normal".