Supero PDSBM-LN1, User Manual

Page: 53 / 95

Chapter 4: BIOS
4-7
Enabling Multi-Media Timer
Select Yes to activate a set of timers that are alternative to the traditional 8254
timers for OS use. The options are Yes and No .
Power Button Behavior
If set to Instant-Off , the system will power on or power off immediately as soon as
the user presses the power button. If set to 4-Second Override, the system will be
powered on or off when the user presses the power button more than 4 seconds.
The options are Instant-Off and 4-Second Override.
Resume On Modem Ring
Select On to “wake your system up” when an incoming call is received by your
modem. The options are On and Off .
Resume On PME#
Select On to “wake your system up” from the PME#. The options are On and
Off .
Power Loss Control
This setting allows you to decide how the system will react when power returns after
a sudden power loss. The options are Stay Off, Power On, and Last State .
Watch Dog
Select Enabled to automatically reset the system if the system is not active for
more than 5 minutes. The options are Enabled and Disabled .
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
the system confi guration settings during bootup.
X
Advanced Processor Options
Access the submenu to make changes to the following settings.
CPU Speed
This item indicates the speeds of the processor(s) installed on the motherboard.
Frequency Ratio (Available when supported by the CPU.)
The feature allows the user to set the internal frequency multiplier for the CPU.
The options are: Default and x9.
Frequency High Ratio (Available when supported by the CPU.)
The feature allows the user to set high ratio internal frequency multiplier for Intel
SpeedStep CPUs. The options are: x12 , x13, x14, x15, x16, x17 and x18. ( Note :
If a wrong ratio which is not supported by the CPU is selected, the system may
hang. If this happens, clear CMOS to recover the system.)