Supero PDSBM-LN1, User Manual

Page: 62 / 95

4-16
PDSBM-LN1/PDSBM-LN2/PDSBM-LN2+ User's Manual
X
Hardware Monitoring
CPU Overheat Temperature
This option allows the user to set a CPU temperature overheat threshold that will
activate the alarm system when the CPU temperature reaches this pre-set temperature
threshold. The options are 75
o
C, 80
o
C, 85
o
C and 90
o
C. ( Note )
Highlight this and hit <Enter> to see monitor data for the following items:
CPU Temperature
System Temperature
Fan1-Fan5 Speeds : If the feature of Auto Fan Control is enabled, the BIOS will
automatically display the status of the fans indicated in this item.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When the
CPU on-die temperature increases, the fan speed will also increase, and vice versa.
Select Workstation if your system is used as a Workstation. Select Server if your
system is used as a Server. Select 3-pin if your chassis uses 3-pin fans. Select
4-pin if your chassis uses 4-pin fans. Select Disable to disable the fan speed control
function and allow the onboard fans to constantly run at full speed (12V). The Op-
tions are: 1. Disable (Full Speed @12V) , 2. 3-pin Servers, 3. 3-pin Workstations,
4. 4-pin Servers, and 5. 4-pin Workstations.
Voltage Monitoring
The following items will be monitored and displayed:
V-CPU
Vdimm
1.5V
3.3V/3.3V Standby
5V
12V
Vbat.
Note: In the Windows OS environment, the Supero Doctor III settings take prece-
dence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the
temperature threshold settings previously set in the BIOS. Any subsequent changes
to these thresholds must be made within Supero Doctor, since the SD III settings
override the BIOS settings. For the Windows OS to adopt the BIOS temperature
threshold settings, please change the SDIII settings to be the same as those set in
the BIOS.