Supero PDSBM-LN1, User Manual

Page: 51 / 95

Chapter 4: BIOS
4-5
Type
This option allows the user to select the type of SATA drives. Select Auto for
the BIOS to automatically set the SATA drive's capacity, number of heads, etc.)
Enter a number from 1-39 to select a predetermined type of the HDD drive.
Select User to allow the user to enter the parameters of the HDD drive installed
at this connection. Select CDROM if a CDROM drive is installed. Select ATAPI
if a removable disk drive is installed.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
for multi-sector transferring. The options are Disabled , 4 Sectors, 8 Sectors,
and 16 Sectors.
32-Bit I/O
Select Enabled to enable the function of a 32-bit IDE data transfer. The options
are Enabled and Disabled .
LBA Mode Control
This item allows the user to specify if the Phoenix BIOS will access the IDE
Channel 0 Master Device via the LBA mode. The options are Enabled and
Disabled.
Transfer Mode
This option allows the user to set the transfer mode. The options are Standard ,
Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4, FPIO3/DMA1 and FPIO4/DMA2.
Ultra DMA Mode
This option allows the user to select the Ultra DMA Mode. The options are Disabled ,
Mode 0, Mode 1, Mode 2, Mode 3, Mode 4, and Mode 5.
System Memory
This item indicates the size of the system memory detected by the BIOS during
POST.
Extended Memory
This item indicates the size of the extended memory detected by the BIOS during
POST.