Supero PDSBM-LN1, User Manual

Page: 40 / 95

2-22
PDSBM-LN1/PDSBM-LN2/PDSBM-LN2+ User's Manual
DIMM A
KB/Mouse
JPL1
COM1
USB1,2,3,4
VGA
24-Pin ATX PWR
LAN1
LAN2
Fan5
Super I/O
North Bridge
Intel 946GZ
LAN CTRL
DIMM B
JPL2
LAN CTRL
Slot 6 PCI-E. x4 (in x8 slot)
Slot 6 Expansion PCI-33 MHz
Slot 5 PCI-33 MHz
JI
2
C2
JI
2
C1
JWOR
SPKR
COM2
Buzzer
JWD
WOL
BIOS
USB 5
USB 6
USB 7,8
I-SATA0
I-SATA1
I-SATA2
I-SATA3
JBT1
IDE
Fan4
JL1
Fan3
Fan2
Floppy
FP
Control
ICH7R
South Bridge
Battery
Processor
Fan1
8-pin PWR
LE2
LE4
LE3
JP3
PDSBM-LN1/LN2
B
A
A. CPU VRM OH LED
(LE2)
B. POST Code Message
LED (LE3)
C. POST Code Message
LED (LE4)
CPU VRM Overheat LED
Indicator (LE2)
A CPU VRM Overheat LED is located at
LE2 on the motherboard. When the tem-
perature of CPU VRM is normal, the CPU
VRM Overheat LED is off. When the CPU
VRM is over 90 o C, the CPU VRM Over-
heat LED will turn yellow, and the CPU will
slow down to prevent the CPU VRM from
overheating. See the layout below for the
LED location.
CPU VRM Overheat LED
LED Settings
LED Color Defi nition
Off CPU VRM Temperature:
Normal
Yellow
CPU VRM over 90
0
C,
CPU slows down
POST Code LED Indicators (LE3,
LE4)
Two POST Code LED Indicators are located
at LE3 and LE4 on the motherboard. These
two LEDs are used to display POST (Power
On Self Test) Code Messages through dif-
ferent sets of green and yellow light com-
binations. Refer to the table on the right
for POST Code Messages. See the layout
below for the LED location.
POST Code LED Indicators
LED Settings
LE3 LE4
(Green) (Yellow) POST Code Message
Blink-
ing Blink-
ing Memory Initialization @
POST 28h
Blink-
ing On VGA Initialization @
POST 4Ah
Off Off Boot to OS @ POST C0h
On Blink-
ing PCI Initialization @
POST 49h
C