LSI MegaRAID Confi guration for the LSI 1068 Controller User's Manual
2-28
Once you have selected the correct redundant drive to check consistency,
3.
press <F10>. A screen with a confi rmation prompt will appear as shown
below:
At the prompt, select Yes and press <Enter> to proceed with the data consis-
4.
tency check. A graphic showing the progress appears until it completes.
Note
: If data inconsistency is found during Check Consistency, the LSI
MegaRAID will automatically fi x the error by writing the source data to
the mirrored (target) drive. When this occurs, the following message will
appear at the bottom of the screen:
The Data on the Drives is inconsistent. Repair Done!
However, if a media error is found on the source drive or a hard media
error is found on the mirrored (target) drive, a dialogue box will appear
with the following message:
