Confi guring the LSI MegaRAID Settings
2-19
Updating the Parameters of a Selected Virtual Drive
When the parameters of the virtual drive you wish to update appears as
4.
shown above, use up/down arrow keys to select the item you wish to update
and press <Enter>.
Note
: Some items are for display only. The item that allows updates will
display a update option submenu as shown below.
Updating the Disk Write-Cache Setting of a Selected Virtual
Drive
When the parameters of a selected virtual drive appears, use the up/down
5.
arrow keys to select Disk WC (Write-Cache) and press <Enter> as shown
above.
Notes
: Any changes to the Disk Write-Cache setting will be applied to all
drives in the same array. When the Disk Write-Cache is
On
, a write trans-
action is considered complete when all data has been written to the disk
cache. When Disk Write-Cache is
Off,
the write transaction is considered
complete when the data has been written to the disk.
Warning
: When Disk Write-Cache is On, data can be lost if a power failure
occurs before the cached data is written to the disk.
