Confi guring the LSI MegaRAID Settings
2-25
2-9 Rebuilding a Disk Drive by Using the Rebuild Menu
The LSI MegaRAID Software allows you to rebuild a failed drive in a redundant array.
A failed drive can be rebuilt only when its physical presence can be detected, and
its size is greater than or equal to the defi ned size of the array. (A rebuild will not
be started if a failed drive's size is smaller than the defi ned size of the array.)
Rebuilding a Physical Drive
Follow the steps to rebuild a failed driving using the rebuild setting.
From the LSI Main Menu, select Rebuild and press <Enter>.
1.
Using the up/down arrow keys, select the physical drive you wish to rebuild
2.
and press <Spacebar>. The information or properties of the selected drive will
appear as shown below: