Confi guring the LSI MegaRAID Settings
2-1
Chapter 2
Confi guring the LSI MegaRAID Settings for the LSI
1068 Controller
This chapter provides confi guration instructions for the LSI Embedded
MegaRAID Software Utility. If you do not wish to confi gure LSI Software
RAID settings, please skip this section and go directly to the OS Installa-
tion. For OS installation instructions, please refer to our web site at www.
supermicro.com.
For system stability, please do not use both SAS and SATA drives in the
same array.
2-1 Using the LSI MegaRAID Confi guration Utility
Follow the steps indicated below to confi gure arrays and logical drives.
Power on the system.
1.
When the screen as shown below displays, press <CTRL> and <M> to enter
2.
the LSI MegaRAID Confi guration Utility.
Once you are in the LSI MegaRAID Software Confi guration Utility, the LSI
3.
MegaRAID Main screen as shown on the next page will appear.