Supero 6047R-E1R36L, User Manual

Page: 72 / 112

6-10
S
UPER
S
TORAGE
S
YSTEM 6047R-E1R36L User's Manual
6-7 Power Supply
The SuperServer 6047R-E1R36L has an 1280 watt redundant power supply con-
sisting of two power modules. Each power supply module has an auto-switching
capability, which enables it to automatically sense and operate at a 100V - 240V
input voltage.
Power Supply Failure
If either of the two power supply modules fail, the other will take the full load and
allow the system to continue operation without interruption. The Power Fail LED will
illuminate and remain on until the failed module has been replaced. Replacements
can be ordered directly from Supermicro (see contact information in the Preface).
The power supply modules have a hot-swap capability, meaning you can replace
the failed module without powering down the system.
Removing/Replacing the Power Supply
1. First unplug the power cord from the failed power supply module.
2. Push the release tab on the back of the power supply as illustrated
3. Pull the power supply out using the handle provided.
4. Replace the failed power module with another of the same model.
5. Push the new power supply module into the power bay until it clicks into the
locked position.
6. Plug the AC power cord back into the module.