Supero 6047R-E1R36L, User Manual

Page: 50 / 112

5-20
S
UPER
S
TORAGE
S
YSTEM 6047R-E1R36L User's Manual
Fan Headers
There are eight fan headers on the
serverboard, all of which are 4-pin
fans. Pins 1-3 of the fan headers
are backward compatible with the
traditional 3-pin fans. (Fan speed
control is supported with 4-pin fans
only.) See the table on the right for pin
de
fi nitions. The onboard fan speeds
are controlled by IPMI.
ATX PS/2 Keyboard and PS/2
Mouse Ports
The ATX PS/2 keyboard and the PS/2
mouse are located beside the USB0/1
ports. The mouse port is above the
keyboard port. See the table on the
right for pin de
fi nitions.
NMI Button
The non-maskable interrupt button
header is located on pins 19 and 20
of JF1. Refer to the table on the right
for pin de
fi nitions.
NMI Button
Pin Defi nitions (JF1)
Pin# De fi nition
19 Control
20 Ground
Fan Header
Pin Defi nitions
(FAN1-8)
Pin# De fi nition
1 Ground (Black)
2 +12V (Red)
3 Tachometer
4 PWR Modulation
PS/2 Keyboard and
Mouse Port Pin
Defi nitions
Pin# De fi nition
1 Data
2 NC
3 Ground
4 VCC
5 Clock
6 NC
Power On LED
The Power On LED connector is lo-
cated on pins 15 and 16 of JF1 (use
JLED for a 3-pin connector). This
connection is used to provide LED
indication of power being supplied to
the system. See the table on the right
for pin de
fi nitions.
Power LED
Pin Defi nitions (JF1)
Pin# De fi nition
15 5V Stby
16 Control
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. Attach an appropriate
cable from the chassis to inform you
of a chassis intrusion when the chas-
sis is opened
Chassis Intrusion
Pin Defi nitions
Pin# De fi nition
1 Intrusion Input
2 Ground