Supero 6047R-E1R36L, User Manual

Page: 49 / 112

Chapter 5: Advanced Serverboard Setup
5-19
Overheat/Fan Fail/PWR Fail LED
Connect an LED to the OH connection
on pins 7 and 8 of JF1 for the Over-
heat/Fan Fail/Power Fail and UID
LED connections. The red LED on
pin 7 provides warning of overheat,
fan failure or power failure. The blue
LED on pin 8 works as the front panel
UID LED indicator. The red LED takes
precedence over the blue LED by
default. Refer to the table on the right
for pin de
fi nitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. This LED
is used to display all IDE/SAS/SATA
activity. See the table on the right for
pin de
fi nitions.
OH/Fan Fail LED
Pin Defi nitions (JF1)
Pin# De fi nition
7 Vcc
8 Ground
NIC2 LED
Pin Defi nitions (JF1)
Pin# De fi nition
9 Vcc
10 Ground
HDD LED
Pin Defi nitions (JF1)
Pin# De fi nition
13 Vcc
14 HD Active
NIC2 (JLAN2) LED
The LED connections for JLAN2 are
on pins 9 and 10 of JF1. Attach an
LED cable to display network activ-
ity. See the table on the right for pin
de
fi nitions.
NIC1 LED
Pin Defi nitions (JF1)
Pin# De fi nition
11 Vcc
12 Ground
NIC1 (JLAN1) LED
The LED connections for JLAN1 are
on pins 11 and 12 of JF1. Attach an
LED cable to display network activ-
ity. See the table on the right for pin
de
fi nitions.
OH/Fan Fail Indicator
Status
State De fi nition
Off Normal
On Overheat
Flash-
ing Fan Fail
Power Fail LED
The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
de
fi nitions.
PWR Fail LED
Pin Defi nitions (JF1)
Pin# De fi nition
5 Vcc
6 Ground