Supero 6047R-E1R36L, User Manual

Page: 48 / 112

5-18
S
UPER
S
TORAGE
S
YSTEM 6047R-E1R36L User's Manual
Reset Button
The Reset Button connection is
located on pins 3 and 4 of JF1 and
attaches to the reset switch on the
computer chassis. See the table on
the right for pin de
fi nitions.
Power Button
The Power On connection is on pins
1 and 2 of JF1. These should be
connected to the chassis power but-
ton. See the table on the right for pin
de
fi nitions.
5-8 Connector Defi nitions
Required Connection
ATX Power 24-pin Connector
Pin Defi nitions
Pin# De fi nition Pin # De fi nition
13 +3.3V 1 +3.3V
14 -12V 2 +3.3V
15 COM 3 COM
16 PS_ON 4 +5V
17 COM 5 COM
18 COM 6 +5V
19 COM 7 COM
20 Res (NC) 8 PWR_OK
21 +5V 9 5VSB
22 +5V 10 +12V
23 +5V 11 +12V
24 COM 12 +3.3V
Reset Button
Pin Defi nitions (JF1)
Pin# De fi nition
3 Reset
4 Ground
Power Button
Pin Defi nitions (JF1)
Pin# De fi nition
1 Power Signal
2 Ground
Secondary Power Connector
JPW2 and JPW3 must also be con-
nected to the power supply. See the
table on the right for pin de
fi nitions.
+12V 8-pin Power
Pin Defi nitions
Pins De fi nition
1 - 4 Ground
5 - 8 +12V
Warning
: To provide adequate
power supply to the serverboard,
be sure to connect JPW1 and both
JPW2 and JPW3 to the power
supply. Failure to do so will void
the manufacturer warranty on your
power supply and serverboard.
Power Connectors
A 24-pin main power supply connec-
tor (JPW1) and two 8-pin CPU power
connectors (JPW2/3) must be con-
nected to the power supply. These
power connectors meet the SSI EPS
12V speci
fi cation. See the table on the
right for pin de fi nitions.