Supero 6047R-E1R36L, User Manual

Page: 107 / 112

A-1
Appendix A: BIOS Error Beep Codes
Appendix A
BIOS Error Beep Codes
During the POST (Power-On Self-Test) routines, which are performed at each
system boot, errors may occur.
Non-fatal errors
are those which, in most cases, allow the system to continue to
boot. The error messages normally appear on the screen.
Fatal errors
will not allow the system to continue with bootup procedure. If a
fatal error occurs, you should consult with your system manufacturer for possible
repairs.
These fatal errors are usually communicated through a series of audible beeps.
The numbers on the fatal error list correspond to the number of beeps for the
corresponding error.
BIOS Error Beep Codes
Beep Code/LED Error Message Description
1 beep Refresh Ready to boot
5 short beeps + 1 long
beep Memory error No memory detected in the
system
5 beeps No Con-In or No
Con-Out devices Con-In: USB or PS/2 key-
board, PCI or Serial Console
Redirection, IPMI KVM or SOL
Con-Out: Video Controller, PCI
or Serial Console Redirection,
IPMI SOL
X9 IPMI Error Codes
1 Continuous Beep System OH System Overheat