Supermicro X11DAC User Manual Download Page 107

Page: 107 / 216

Chapter 4: UEFI BIOS

107

•

Media Temperature:

This feature displays the media temperature in Celsius.

•

Percentage Remaining



Apply Changes

Use this feature to apply changes that you've made on the DCPMM modules to the system.



Back to Main Menu

Select this feature and press <Enter> to go back to the

Intel® Optane® DC Persistent

Memory Configuration

menu.



Update Firmware

Use this feature to select the firmware image to be loaded on the DCPMM module. Once it
is loaded to the system, please reboot the system and select update for the firmware to take
effect. The following items will display:

•

Current Firmware Version

: This feature displays the current firmware version.

•

Selected Firmware Version

: This feature allows the user to select a new firmware ver

sion to use.

•

File:

This feature allows the user to specify the file path in the root directory that contains

the new firmware for firmware update.

•

Staged Firmware Version:

This feature indicates the staged firmware version of the

DCPMM module specified by the user.



Update

Select this feature to update the firmware settings.



Back to Main Menu

Select this feature and press <Enter> to go back to the

Intel® Optane® DC Persistent

Memory Configuration

menu.



Configure Security

Use this feature to configure the security settings for all onboard DCPMM modules.

Summary of Contents for X11DAC

























































































































































































































Search results

Summary of Contents for X11DAC

Reviews:

Related manuals for X11DAC

Brands by name

Popular brands

Supermicro X11DAC, User Manual

Search results

Summary of Contents for X11DAC

Reviews:

Related manuals for X11DAC

Brands by name

Popular brands