manualshive.com logo in svg

Supermicro X11DAC, User Manual

The Supermicro X11DAC boasts exceptional performance and reliability, making it a top choice for demanding server needs. Unlock the full potential of this cutting-edge motherboard with our comprehensive and user-friendly User Manual. Download your free copy now from manualshive.com and harness the power of your Supermicro X11DAC.

Share
Download
background image

Super X11DAC User's Manual

98

Out-of-Band Mgmt (Management) Port

This feature selects a serial port in a client server to be used by the Windows  Emergency 
Management Services (EMS) to communicate with a remote host server. The default option 
is 

COM2/SOL

. 

Terminal Type

Use this feature to select the target terminal emulation type for Console Redirection. 
Select VT100 to use the ASCII character set. Select VT100+ to add color and function 
key support. Select ANSI to use the extended ASCII character set. Select VT-UTF8 to use 
UTF8 encoding to map Unicode characters into one or more bytes. The options are ANSI, 
VT100, VT100+, and 

VT-UTF8

.  

Bits Per Second

This feature sets the transmission speed for a serial port used in Console Redirection. 
Make sure that the same speed is used in both host computer and the client computer. A 
lower transmission speed may be required for long and busy lines. The options are 9600, 
19200, 57600, and 

115200

 (bits per second).

Flow Control

Use this feature to set the flow control for Console Redirection to prevent data loss caused 
by  buffer  overflow.  Send  a  "Stop"  signal  to  stop  data-sending  when  the  receiving  buffer 
is full. Send a "Start" signal to start data-sending when the receiving buffer is empty. The 

options are 

None,

 Hardware RTS/CTS, and Software Xon/Xoff.

The setting for each these features is displayed: 

Data Bits, Parity, Stop Bits

ACPI Settings

Use  this  feature  to  configure  Advanced  Configuration  and  Power  Interface  (ACPI)  power 

management settings for your system.

NUMA Support (Available when the OS supports this feature)

Select Enabled to enable Non-Uniform Memory Access support to enhance system perfor-
mance. The options are

 Enabled 

and Disabled.

WHEA Support

Select Enabled to support the Windows Hardware Error Architecture (WHEA) platform and 
provide a common infrastructure for the system to handle hardware errors within the Windows 
OS environment to reduce system crashes and to enhance system recovery and health 
monitoring. The options are 

Enabled

 and Disabled.

Trusted Computing (Available when a TPM device is installed 

Summary of Contents for X11DAC

























































































































































































































Reviews:

No comments

Related manuals for X11DAC

Zapi SMART CONSOLE User Manual preview
SMART CONSOLE
Brand: Zapi Pages: 50
Infineon DCDC SBC Series Getting Started preview
DCDC SBC Series
Brand: Infineon Pages: 17
Renesas R0K5R8C34DK2HBR Hardware Instruction Manual preview
R0K5R8C34DK2HBR
Brand: Renesas Pages: 32
ON Semiconductor AP0101AT2L00XPGAH3-GEVB User Manual preview
AP0101AT2L00XPGAH3-GEVB
Brand: ON Semiconductor Pages: 6
JS Automation FA-G41A User Manual preview
FA-G41A
Brand: JS Automation Pages: 18
Ublox EVK-ANNA-B4 User Manual preview
EVK-ANNA-B4
Brand: Ublox Pages: 42
Fujitsu Siemens Computers D1421 Technical Manual preview
D1421
Brand: Fujitsu Siemens Computers Pages: 20
Texas Instruments DRV8899-Q1 User Manual preview
DRV8899-Q1
Brand: Texas Instruments Pages: 11
Acrosser Technology AR-B9660 Quick Manual preview
AR-B9660
Brand: Acrosser Technology Pages: 3
Commell LV-675 User Manual preview
LV-675
Brand: Commell Pages: 53
ETOP P/I-P3BVL User Manual preview
P/I-P3BVL
Brand: ETOP Pages: 68
Supermicro X11SRL-F User Manual preview
X11SRL-F
Brand: Supermicro Pages: 121
TYAN S2668 Manual preview
S2668
Brand: TYAN Pages: 54
SOYO SY-P4I845GV Quick Start Manual preview
SY-P4I845GV
Brand: SOYO Pages: 44
Kontron KTQ87/mITX User Manual preview
KTQ87/mITX
Brand: Kontron Pages: 49
Kontron mITX-BW User Manual preview
mITX-BW
Brand: Kontron Pages: 68
Johnson Outdoors MINN KOTA ULTREX 112 Series Owner'S Manual preview
MINN KOTA ULTREX 112 Series
Brand: Johnson Outdoors Pages: 74
Contec ITX-i7435/ATX Quick Installation Manual preview
ITX-i7435/ATX
Brand: Contec Pages: 2

Brands by name

Popular brands

Load more brands