manualshive.com logo in svg

Supermicro X11DAC, User Manual

The Supermicro X11DAC boasts exceptional performance and reliability, making it a top choice for demanding server needs. Unlock the full potential of this cutting-edge motherboard with our comprehensive and user-friendly User Manual. Download your free copy now from manualshive.com and harness the power of your Supermicro X11DAC.

Share
Download
background image

Super X11DAC User's Manual

124

Add New Boot Option

This feature allows the user to add a new boot option to the boot priority features for system 
boot.

Add Boot Option

Use this item to specify the name for the new boot option.

Path for Boot Option

Use this feature to enter the path for the new boot option in the format fsx:\path\filename.efi. 

Boot Option File Path

Use this feature to specify the file path for the new boot option. 

Create

After the name and the file path for the boot option are set, press <Enter> to create the 

new boot option in the boot priority list.

Delete Boot Option

Use this feature to select a boot device to delete from the boot priority list.

Delete Boot Option

Use this feature to remove an EFI boot option from the boot priority list.

Add New Driver Option

Use this feature to select a new driver to add to the boot priority list.

Add Driver Option

Use this feature to specify the name of the driver to be added to the boot priority list.

Path for Drover Option

Use this feature to specify the path to the driver that will be added to the boot priority list. 

Driver Option File Path

Use this feature to specify the file path of the driver that will be added to the boot priority list. 

Create

After the driver option name and the file path are set, press <Enter> to enter to submenu 

and click OK to create the new boot option drive.

Summary of Contents for X11DAC

























































































































































































































Reviews:

No comments

Related manuals for X11DAC

IEI Technology KINO-HM551 User Manual preview
KINO-HM551
Brand: IEI Technology Pages: 126
PC Partner P4M266AS4-258M Manual preview
P4M266AS4-258M
Brand: PC Partner Pages: 20
QDI Pentium P5I430TX/IIB TITANIUM IIB Manual preview
Pentium P5I430TX/IIB TITANIUM IIB
Brand: QDI Pages: 53
Colorful CVN X570 GAMING PRO V14 Manual preview
CVN X570 GAMING PRO V14
Brand: Colorful Pages: 64
MSI MS-6135 User Manual preview
MS-6135
Brand: MSI Pages: 69
Freetech P8F155 User Manual preview
P8F155
Brand: Freetech Pages: 79
AXIOMTEK CAPA315 User Manual preview
CAPA315
Brand: AXIOMTEK Pages: 67
DFI EHL171 Quick Reference preview
EHL171
Brand: DFI Pages: 5
Gigabyte GA-MA74GMT-S2 User Manual preview
GA-MA74GMT-S2
Brand: Gigabyte Pages: 100
ASROCK 880GM-LE - V1.0 User Manual preview
880GM-LE - V1.0
Brand: ASROCK Pages: 60
National Semiconductor TPS65132L User Manual preview
TPS65132L
Brand: National Semiconductor Pages: 22
PC Partner MB520N Technical Reference Booklet preview
MB520N
Brand: PC Partner Pages: 20
CAME ZBKE Manual preview
ZBKE
Brand: CAME Pages: 8
DFI CS636-C246 User Manual preview
CS636-C246
Brand: DFI Pages: 73
Microchip Technology ADM00902 User Manual preview
ADM00902
Brand: Microchip Technology Pages: 54
MSI MS-6566E Manual preview
MS-6566E
Brand: MSI Pages: 76
DFI Qseven FS700 Series User Manual preview
Qseven FS700 Series
Brand: DFI Pages: 18
DFI Q7-951 User Manual preview
Q7-951
Brand: DFI Pages: 46

Brands by name

Popular brands

Load more brands