Supermicro X11DAC User Manual Download Page 113

Page: 113 / 216

Chapter 4: UEFI BIOS

113

Security Diagnostics

Select Enabled for the security diagnostics test to be performed on the DCPMM module. The
options are

Enabled

and Disabled.



Execute Tests

Select this feature and press <Enter> to execute the selected diagnostic tests.



Back to Main Menu

Select this feature and press <Enter> to go back to the

Intel® Optane® DC Persistent

Memory Configuration

menu.



Preferences

View and/or modify user preferences

Default DIMM ID

This feature allows the user to view and to modify the default DIMM ID as displayed on the
screen. The options are

Handle

and UID.

Capacity Units

This feature allows the user to view and to set the default capacity unit of the selected
DCPMM to be displayed on the screen. The options are

Auto

, Auto_10, B, MB, MiB, GB,

GiB, TB, and TiB.

App Direct Settings

This feature displays the Application Direct Settings. The default setting is

4KB_4KB

(Recommended)

App Direct Granularity

This feature allows the user to view and modify the minimum App Direct Granularity for each
DIMM installed on the motherboard. The default setting is

Recommended

and 1.



Back to Main Menu

Press this to return to the

Intel® Optane® DC Persistent Memory Configuration

menu.

Summary of Contents for X11DAC

























































































































































































































Search results

Summary of Contents for X11DAC

Reviews:

Related manuals for X11DAC

Brands by name

Popular brands

Supermicro X11DAC, User Manual

Search results

Summary of Contents for X11DAC

Reviews:

Related manuals for X11DAC

Brands by name

Popular brands